MasterMover MasterTug MT1500+ - Anti-Crush Button and Coupling Switch

Controls & Indications
9
Anti-Crush Button
At the front centre of the control head is a red Anti-
Crush button which overrides the throttle levers when
pressed.
In the unfortunate event of being trapped while the
machine is reversing, this button will activate an
emergency stop and move forward slowly. If pressed
while moving forwards, the machine will perform an
emergency stop and will not move until the throttle
lever has returned to its neutral position first.
Hydraulic Coupling Switch
This activates the hydraulic pump on the machine to either raise/lower the coupling mast or to
clamp/unclamp the coupling, allowing you to connect to the load. See ‘Coupling to the Load’
in your machine Bolt-On manual.
Lower/Clamp
Raise/Unclamp
Warning Horn
Use the horn to give audible warning when you
approach corners or to let other people know that a
moving load is coming.