Health & Safety
4
WARNING: MACHINE WEIGHT
Our machines are very heavy and could easily injure someone if incorrectly
used.
Preparation
The machine is supplied ready for use, although in some cases you may need to fit the coupling
you have chosen (fitting the coupling is simple and requires only a few basic hand tools).
At the MasterMover factory:
We set the acceleration and speed. Note, this can be altered.
We provide and attach the chosen machine Options (some simple assembly may be
required in the case of certain options).
We send the unit with a fully-charged battery pack.
Unpacking
Check that you have received all the parts shown on the itemised delivery note. If anything is
missing, please contact your supplier immediately.
IMPORTANT:
FAILURE TO COMPLY WITH THE FOLLOWING POINTS COULD RESULT IN
SERIOUS DAMAGE TO EQUIPMENT AND POTENTIALLY CAUSE SEVERE INJURY
OR DEATH OF THE OPERATOR OR THOSE AROUND
Lighting in the Work Area
The working area must be sufficiently well lit so that the operator and all other pedestrians in the
area can clearly see:
The load and your immediate surroundings.
The route ahead that the load will be travelling through.
The condition of the ground/surface where the machine and load will move.
All possible obstructions.
To Next Page
Loading...
