53
Step 4. Be sure to select battery type as “WEC” in LCD program 5.
If communication between the inverter and battery is successful, the battery icon on LCD display will
“flash”. Generally speaking, it will take longer than 1 minute to establish communication.
SOLTARO
Step 1. Use a custom-made RJ45 cable to connect inverter and Lithium battery.
Step 2. Open DC isolator and switch on Lithium battery.
Step 3. Turn on the inverter.
Step 4. Be sure to select battery type as “SOL” in LCD program 5.
To Next Page
Loading...
Need help?
General
