8
6. Stew Function
• Place ingredients into cooking pot.
• Press
button to turn on appliance.
• Press Menu button until Stew function is selected.
• Default temperature is 90°C and default time is two hours.
• Press Timer/Temp button and temperature will blink. Press + or - to adjust temperature (between
79°C and 99°C).
• Press Timer/Temp button again. Time will blink, then press + or - to adjust time from 15 minutes to
four hours.
• Press
button to start cooking process.
• Stew function works best with lid placed on appliance.
• Delay Start can be used with this function.
• After cooking is complete, appliance will enter Keep Warm mode.
7. Rice Function
• Place rice and water into cooking pot
• Press
button to turn on appliance.
• There is no temperature displayed with this function and cooking time is automatically calculated.
Time will appear on the display and count down for the last 8 minutes of the cooking process.
• Press Menu button until Rice function is selected.
• Press
button to start cooking process.
• Rice function works best with lid placed on appliance.
• After cooking is complete, appliance will enter Keep Warm mode.
8. Keep Warm Function
• Place ingredients into cooking pot.
• Press
button to turn on appliance.
• Press Menu button until Keep Warm function is selected.
• Temperature is fixed and cannot be adjusted.
• Default Keep Warm run time is set at four hours and can be adjusted using the Timer/Temp button
and + or - buttons. Time range is one hour to ten hours.
• Press
button to start Keep Warm process.
• Keep Warm function works best with lid placed on appliance.
9. Delay Start Function
• Select your desired cooking function as normal. Delay Start function can be used with Slow cook,
Steam, Stew and Rice cooking functions.
• Press Delay Start button. The word ‘Pre’ will show up on screen.
• Use + button to reach the time you would like appliance to delay commencement of cooking.
To Next Page
Loading...
