To Next PageTo Next Page
Need help?Do you have a question about the Matermacc IRRIGAMATIC EVO and is the answer not in the manual?
Steps for installing the electronic console on the irrigator frame, ensuring proper positioning and connections.
Procedure for mounting inductive and magnetic speed sensors on the pinion or roller.
Guide for installing by-pass, adjusting, ball, and end-of-work valves for water flow control.
Procedure for installing the sensor that detects the end of the hose rewinding process.
Overview of manual purpose, update policy, and copyright.
Covers equipment warranty, claims, duration, and conditions that invalidate the guarantee.
Essential safety notes for operation, maintenance, cleaning, and recycling.
Installation and calibration of pressure switch, and connection of outer alarm.
Schematic illustrating the wiring connections for the Irrigamatic EVO1 - EVO4 system.
Table detailing configuration parameters reserved for the manufacturer.
Description of the control panel components: LCD, push button, and incremental encoder.
Procedure for starting the console and navigating menus, including password access.
Steps for loading configuration parameters, including password entry and sequence.
Guide for performing manual or mathematic calibration of system parameters.
Summary tables for calibration parameters, including length and conversion factors.
General
