Matest B041 - Page 18

Rev. Descrizione Redatto/Gestito Approvato Cod.Ident. Pagine Data Em.
0.6 Manuale Istruzioni GN UTEC B041.M01.EN 18/47 07/2014
Type 2
If your PISTON has 3 teeth
and 3 screws (see photo), fit
the piston with the rod, when
in lowered position. Then
enter the 3 teeth. Once lined,
insert the 3 screws and
tighten them with the Allen
wrench, making sure that the
piston is permanently
blocked.