Matest B041 - Transportation and Movement; Packaging Removal

Rev. Descrizione Redatto/Gestito Approvato Cod.Ident. Pagine Data Em.
0.6 Manuale Istruzioni GN UTEC B041.M01.EN 5/47 07/2014
1.12
STORAGE
WARNING
The appliance must be stored and conserved in the original packaging and in a closed
environment, protected from atmospheric agents with a minimum temperature of -15C°, and a
maximum of +60C° and a maximum humidity of 70%.
1.13
TRANSPORTATION AND MOVEMENT
WARNING
In order to avoid irreparable machine damage, move with care, do not overturn, protect from
rain, do not stack, protect the packaging and its contents from bumps and sources of heat.
Machine transportation and movement must be entrusted to Qualified Personnel who can ensure correct
movement.
The machine is equipped of two steel eyebolts. (top side).
DANGER
WARNING
Do not transport or move the product should it be impossible to respect
the conditions on the packaging or there be any doubts. Request
information from the constructor.
260 Kg 350 Kg
1.14
PACKAGING REMOVAL
After removing the packaging check the machine is
complete and that there are no visibly damaged parts.
DO NOT USE THE MACHINE and refer to the
constructor when in doubt.
DANGER
The components used for
packaging (plastic bags,
polystyrene, nails, screws,
wood, etc)must
be kept out of reach of children, as they are sources of
danger. These components should be placed in the
appropriate containers.
WARNING
In order to avoid bumps
and overturn adopt the
normal and logical
precautions.
WARNING
Before disposing of the
packaging check all
machine components
such as accessories, utensils, instructions, documents
etc have been removed.