Rev. Descrizione Redatto/Gestito Approvato Cod.Ident. Pagine Data Em.
0.6 Manuale Istruzioni GN UTEC B041.M01.EN 22/47 07/2014
DATE AND TIME
It annuls the changes
It confirms the changes
Parameter Values
Day 1-31 for the following months: January,
March, May, July, August, October, Dicember;
1-30 for April, June, September, November;
1-29 for February in case of al leap year;
1-28 for February if it is not a leap year.
Month “January”, “February”, “March”, “April”, “May”,
“June”, “July”, “August”, “September”,
“October”, “November”, “December”.
Year 1970-2069
Hour 0-23
Minutes 0-59
Seconds 0-59
WARNING IMPORTANT:The and time settings remain stored
for only 10 days if the equipment is kept turned off.
INTERNAZIONAL SETTINGS
It annuls the changes
It confirms the changes
Unit
meas.system
Select the “Metric” measuring system to have the load values expressed in “kN”, the displacement
values in “mm”, the deformation values in “µε”, and the temperature values in “°C”.Select the
“U.S.” measuring system to have the load values expressed in “lb”, the displacement values in
“in”, the deformation values in “µε”, and the temperatures values in“°F”, ...
Decimal separator “Point”, “Comma”.
Date format Types of Date format (i.e. June 1st 2009)
"d/M/yy" es. “1/6/09”
"dd/MM/yy" es. “01/06/09”
"d/M/yyyy" es. 1/6/2009
"dd/MM/yyyy" es. 01/06/2009
"M/d/yy" es. 6/1/09
"MM/dd/yy" es. 06/01/09
"M/d/yyyy" es. 6/1/2009
"MM/dd/yyyy" es. 06/01/2009
"yyyy/M/d" es. 2009/1/6
"yyyy/MM/dd" es. 2009/01/06
"yy/M/d" es. 09/1/6
"yy/MM/dd" es. 09/01/06
Hour format Types of hour format (i.e. time 14.27.05):
"h:mm:ss tt" (or “h:mm tt”) “2:27:05 PM” (or “2:27 PM”)
"H:mm:ss" (or “H:mm”) “14:27:05 (or “14:27”)
Language ITALIAN, ENGLISH, FRENCH, GERMAN, SPANISH, POLISH.
To Next Page
Loading...
