Need help?Do you have a question about the Matosio BluePod and is the answer not in the manual?
Long press ON/OFF key for 2s, device will be turn on/off with a beep.
Long Press Bluetooth/USB mode button for 2 seconds to start Bluetooth pairing mode, turn on the Bluetooth of the mobile phone or computer, and select device SPEAK100 USB&BT to connect. When connection is completed, the light ring and power key will be on in blue, with voice notice.
Connect BluePod to the computer with a USB cable. After connection, the green light ring will rotate clockwise to indicate the charging status, and the green light ring will light up fully when fully charged.
When the device is connected to both Bluetooth and USB, touch the Bluetooth/USB mode button to switch Bluetooth or USB mode.
Press button to answer phone call, press button to end phone call.
When the volume increase + /decrease-, the light circle will turn on/off one by one. When adjustement completed, the light turns off after 4 seconds.
Short press to mute mic; long press for VoiceCap mode for noise cancellation.
Auto power off after 15 min inactivity; battery level shown by green light.
To Next Page
General