T HANDLE WRENCH
(6mm)
REQUIRED TOOLS
Prior to assembling the unit, unpack all of the contents
of the box and make sure that all necessary components
are present. Review the contents of the hardware
package for completeness.
Contact Customer Tech Support at the number listed on
the CONTACT INFORMATION page included with the
OWNER’S MANUAL.
Please make sure that the power plug is not plugged into
the wall outlet while completing the following procedure.
To ensure correct assembly of the unit, carefully read and
follow all assembly steps.
BEFORE YOU BEGIN ASSEMBLY STEP 1
MX14_AEALB3x_5x_7xe_7xi_OM_Rev1_1.indd 10-11 6/4/14 11:24 AM
To Next Page
Loading...
