Matrix Asset Management User Manual

6
VIA DIRECT TO MATRIX ASSET MANAGEMENT SERVER DSL/BROADBAND CONNECTION
V2.2
VPN – HOW TO IMPLEMENT VIA DIRECT TO MATRIX ASSET MANAGEMENT DSL/
BROADBAND CONNECTION
VPN connectivity is used to transport data from the Matrix Asset Management server at your facility to the Matrix Asset Management centralized
servers. To get started, you need to provide network wiring from an interface (DSL router/Cable modem, switch or router) on your network to
the Matrix Asset Management server. This must be an unassigned IP address that is accessible on the network.
In order to address your security concerns, no connections are expected from an external origin. It is the Matrix Asset Management server at
your facility that initiates connections. Traffic will flow on port 80:
If you are using firewall/filtering software on your network, traffic on the ports above must be allowed. Further technical detail is available in the
RAP Access Point manual.
SECTION B: NETWORK IMPLEMENTATION WORKSHEET

Matrix Asset Management Specifications

General

Brand	Matrix
Model	Asset Management
Category	Network Hardware
Language	English