• Keep all the cables parallel to the side of the COSEC ARGO
body in such a way that it should not cover the back portion
of the unit as illustrated in figure below.
• Radially curve all the cables and lead it through the duct to fit
the wall mounting plate easily with COSEC ARGO.
11
12
Step 3: Connect the cables of the ARGO unit and lead all the cables
through the duct of the Wall Mounting plate into the electrical box
recessed in the wall i.e. concealed wiring or through the bottom of
the device in non-concealed wiring.
Duct for Concealed
Wiring
Cable
Connectors
Knock Out Area
for Non-Concealed Wiring
Mounting
Slots
To Next Page
Loading...
