What to do if my Matrix Computer Hardware shows 'No Signal'?
If your Matrix Computer Hardware displays 'No Signal', ensure the digital input cable is correctly connected. Also, verify that the digital signal output is functioning normally. The issue may arise from a disconnected cable or an abnormal digital signal output.
How to fix a Matrix Computer Hardware that won't turn on (Power OFF)?
If your Matrix Computer Hardware is not powering on, ensure the power cable is properly connected to a functioning AC power source. Also, verify that the power switch is in the 'ON' position. The problem could be due to the device being unplugged or the power being turned off.
Why is there no headphone output from my Matrix Computer Hardware?
If there's no headphone output from your Matrix Computer Hardware, it might be operating in DAC Mode. Try switching to INTERNAL mode. Also, check that the volume hasn't been turned down to the minimum. Adjust the volume accordingly.
What to do if there is no analog output from Matrix Computer Hardware?
If you're experiencing no analog output from your Matrix Computer Hardware, the cause might be a disconnected analog port. Ensure the audio cable is correctly connected.
General| Brand | Matrix |
|---|---|
| Model | CUBE |
| Category | Computer Hardware |
| Language | English |
Explains the meaning of status LEDs on the device, including power and signal indicators.
Details how to select between OPTICAL, coaxial, and USB digital input sources.
Describes the Asynchronous Sample Rate Converter's operation and its impact on audio quality.
To Next Page