G3-S10 CHEST PRESS
UNPACKING G3-S10 CHEST PRESS
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your
MATRIX G3-S10 CHEST PRESS is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact
packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. Carefully
unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the G3-S10 CHEST PRESS is 603.5 lbs. (274 kg) including the weight stack. To avoid injury to yourself and prevent
damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to
install the equipment on a stable base, properly level the machine and leave at least two feet of clearence to enter and exit the
machine. Maximum user weight for this machine is 300 lbs. (136 kg).
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
10MM L-Shaped Allen Wrench
17MM Open-End Wrench
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 1
Step 1
Frame Detail
Arc-at Washer
Flat Washer(M10)
Screw (M10X25L)
G13
G12
D32
G14
8
16
24
Qty
16
Item
D32
G14
Description
G12
G13
G14
Screw
Flat Washer
Flat Washer
Screw
Screw
Arc-at Washer
Spring Washer(M10)
Spring Washer
Spring Washer
Step 2
Input Detail
D30
D16
H16
D22
D17
D16
D16
D17
H16
D22
D20
D20
D31
D16
Input Arm
Flat Washer
Screw
Screw
Flange Bushing
Flange Bushing
Input Arm Detail
D17
D16
D20
D22
Item Description
Screw (M12X25L)
Flat Washer(M12)
Lock Washer(M12)
Wavy Washer
Qty
2
2
2
D30
D31
H16
Bolt(M12X110L)
Flange Bushing
Nylon Nut(M12)
1
1
2
4
Step 3
Upholstery Detail
Item Description Qty
11G11 Screw (M10X25L)
G11
G11
Step 6
Accessory Detail
Qty
6
6
2
6
2
4
6
1
1
2
Water Bottle Holder
DescriptionItem
Screw (M8X30L)
Screw (M4X12L)
Description panel
Screw(M8X18L)
Internal Tooth Lock Washer(M4)
Weight Shield
Upper Cover
Rubber Shield Spacer
Rubber Tip Weight Shield Bolt(M8X40L)
B24
B26
B43
B46
B47
B51
Q01
Q02
Q05
Q06
Upper Cover
Towel / Water
Bottle Holder
AB1
B46
B47
Q01
Q06
Q05
Weight Shield
Q02
B51
B43
B26
B24
Step 4
Weight Stack Detail
K12
K12
L14
F19
F18
B26
K07
AL1
K18
L11
L09
K05
Top Plate Detail
Item Description Qty
B26 Screw (M8x30L) 2
F18 Flat Washer (M5) 4
F19 Lock Washer (M5) 4
K05 Knurled Belt Securing Insert 1
K07 Rubber Stack Cushions 2
K12 E-Clipper 4
K18 Flat Washer (M8) 2
L09 Screw (M8x20L) 2
L11 Lock Washer (M8) 2
L14 Screw (M5x16L) 4
Knurled Belt
Securing Insert
Guide Rod
Guide Sleeve
Screw
Selector Pin
Top Weight
Step 5
Belt Routing Detail
F01
AF4
AF1
AF4
F02
F03
F18
F19
F13
1. Firstly, to use that shorter belt to cross ccover, and then to
x the small cam to ensure the belt xation plate is at the top
of the cam and at level. Secondly, to tighten the belt before
xing the xation plate on the other side. At the meantime,
keep around 30mm uncovering on two sides of the belt.
Finally, to x cam cover.
2. To x one side of the other belt at the botton of the big cam
rstly and then tighten the belt. Secondly, to x the other side
of the belt by xation pin. At the meantime, to keep around
30mm uncovering on two sides of the belt.
F02
Lock Washer (M5)
Flat Washer (M5)
Screw (M5x35L)
Belt Fixer
Belt
F13
12
12
12
1
Qty
1
6
F19
F18
F01
Item Description
F03
Belt
Lock Washer
Belt Fixer
Belt
Screw
Flat Washer
S10_chest_press_r2.1.indd 2 12/13/10 9:00 AM
To Previous Page
Loading...
Need help?
General
