Matrix MAGNUM MG-924 - User Manual

To Next Page

MAGNUM SERIES

MG-924 / ADJUSTABLE CROSSOVER

MAINTENANCE CHECKLIST

ACTION FREQUENCY

Clean Upholstery * Daily

Inspect Cables Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As Needed

Clean Grips * As Needed

Lubricate Guide Rods † As Needed

* Upholstery & Grips should be cleaned with a mild soap and

water or a non-ammonia based cleaner.

† Guide rods should be lubricated with Teon based lubricant. Apply

the lubricant to a cotton cloth and then apply up and down the

guide rods.

PRODUCT SPECIFICATIONS

TECH SPECS

Maximum User Weight 159 kg / 350 lbs.

Maximum Training Weight 102 kg / 225 lbs.

Product Weight 330 kg / 728 lbs.

Overall Dimensions

(L x W x H)*

69 x 366 x 234 cm /

27" x 144" x 92"

Weight Horn Diameter

(Weight Plate Storage)

47.63 mm / 1.875”

* Ensure a minimum clearance width of 914 mm / 36” for access

to and passage around MATRIX strength equipment.

WARRANTY

Valid in North America only

Frame (not coatings) * 10 years

Weight stacks 5 years

Pulleys 5 years

Pivot bearings 5 years

Any items not specied 3 years

Labor (excludes upholstery/cables/grips) 3 years

Upholstery/cables/grips/springs 1 year

* Frame is dened as the welded metal base of the unit and does

not include removable parts.

PROPER USAGE

1. Do not exceed weight limits of the

exercise device.

2. If applicable, set safety stops to

appropriate height.

3. If applicable, adjust seat pads, leg pads,

foot pads, range of motion adjustment, or

any other type of adjustment mechanisms

to a comfortable start position. Make

certain that the adjusting mechanism is

fully engaged to prevent unintentional

movement and to avoid injury.

4. Sit on bench (if applicable) and get into

appropriate position for exercise.

5. Exercise using no more weight than you

can safely lift and control.

6. In a controlled manner, perform exercise.

7. Return weight to its fully-supported start

position.

MX13_MAGNUM_OM_MG-924_r1_0.indd 1 6/18/13 10:27 AM

Need help?

Do you have a question about the Matrix MAGNUM MG-924 and is the answer not in the manual?

This document describes the Matrix Magnum Series MG-924 Adjustable Crossover, a strength training equipment designed for commercial use.

Function Description:

The MG-924 Adjustable Crossover is a versatile strength training machine that allows users to perform a wide range of exercises. It features two independent weight stacks and adjustable pulley carriages, enabling users to target various muscle groups through different angles and ranges of motion. The machine is designed for controlled exercise movements, with a focus on user safety and proper form.

Important Technical Specifications:

Maximum User Weight: 159 kg (350 lbs.)
Maximum Training Weight: 102 kg (225 lbs.)
Product Weight: 330 kg (728 lbs.)
Overall Dimensions (L x W x H): 69 x 366 x 234 cm (27" x 144" x 92")
Weight Horn Diameter (Weight Plate Storage): 47.63 mm (1.875")
Clearance: A minimum clearance width of 914 mm (36") is required for access and passage around the equipment.
Installation: The equipment must be installed on a stable and level surface. Manufacturer recommends securing all stationary Matrix strength equipment to the floor to prevent rocking or tipping over. All anchor points must withstand 750 lbs. (3.3 kN) pull-out force.
Compliance: This training equipment complies with EN 957-1 and the relevant portions of EN 957-2 and EN 957-4.

Usage Features:

Proper Usage Guidelines:
- Do not exceed the device's weight limits.
- If applicable, set safety stops to the appropriate height.
- Adjust seat pads, leg pads, foot pads, range of motion, or other adjustment mechanisms to a comfortable start position, ensuring full engagement to prevent unintentional movement and injury.
- Sit on the bench (if applicable) and get into the appropriate position for exercise.
- Exercise using only the weight that can be safely lifted and controlled.
- Perform exercises in a controlled manner.
- Return weight to its fully-supported start position.
Safety Precautions:
- Never allow children on strength training equipment; teenagers must be supervised.
- Read all warnings and instructions and obtain proper instruction before use.
- Inspect the machine before each use; do not use if damaged or inoperable.
- Never attach resistance straps, ropes, or other means to the equipment, as this may cause serious injury. Do not use for support during stretching.
- Always use a spotter.
- Do not exceed the weight capacity.
- Balance the weight applied and use retention devices for weight discs where applicable.
- Cease exercise if feeling faint or dizzy; obtain a medical exam before starting an exercise program.
- Keep body, hair, clothing, and fitness accessories clear of all moving parts.
- Manufacturer recommends securing all equipment to the floor to stabilize and eliminate rocking or tipping over, using a licensed contractor.
- Do not remove or obscure labels.
- For Smith Machines (if applicable), ensure lifting bar catch rods are fully engaged and seated in hooks before releasing the load and exiting the machine. Always set both adjustable stops to the same height.
- Adjustable safety stops, if present, must be used at all times. For equipment with adjustable stops, proper adjustable stop height depends on the exercise performed.
- When adjusting any adjustable mechanism (seat position, pad location, range of motion limiter, pulley carriage, or any other type of adjuster), ensure the adjusting pin is fully engaged in the hole to avoid injury.
- Keep hands and feet clear from moving parts at all times.
Warranty (North America only):
- Frame (not coatings): 10 years
- Weight stacks: 5 years
- Pulleys: 5 years
- Pivot bearings: 5 years
- Any items not specified: 3 years
- Labor (excludes upholstery/cables/grips): 3 years
- Upholstery/cables/grips/springs: 1 year
- Frame is defined as the welded metal base of the unit and does not include removable parts.

Maintenance Features:

Maintenance Checklist:
- Daily: Clean upholstery*, inspect cables.
- Monthly: Clean guide rods, inspect hardware.
- Bi-Annually: Inspect frame.
- As Needed: Clean machine, clean grips*, lubricate guide rods†.
- *Upholstery & Grips should be cleaned with a mild soap and water or a non-ammonia based cleaner.
- †Guide rods should be lubricated with Teflon-based lubricant. Apply to a cotton cloth and then apply up and down the guide rods.
General Maintenance Guidelines:
- Do not use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by your country's local Matrix dealer.
- Maintain labels and nameplates; do not remove them. If unreadable or missing, contact your Matrix dealer for a replacement.
- Perform preventative maintenance regularly. Equipment needs to be inspected at regular intervals.
- Ensure that any person(s) making adjustments or performing maintenance or repair is qualified to do so. Matrix dealers provide service and maintenance training.
Supervised Areas: This equipment should only be used in supervised areas where access and control are specifically regulated by the owner. The owner should determine who is allowed access based on the user's reliability, age, and experience.