Matrix MAGNUM MG-A694-05

To Next Page

MAGNUM SERIES

MG-A694-05 / OPEN RACK

MAINTENANCE CHECKLIST

ACTION FREQUENCY

Clean Upholstery * Daily

Inspect Cables Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As Needed

Clean Grips * As Needed

Lubricate Guide Rods † As Needed

* Upholstery & Grips should be cleaned with a mild soap and water or

a non-ammonia based cleaner.

† Guide rods should be lubricated with Teon based lubricant. Apply the

lubricant to a cotton cloth and then apply up and down the guide rods.

PRODUCT SPECIFICATIONS

TECH SPECS

Maximum User Weight 181.5 kg / 400 lbs.

Maximum Training Weight 408.5 kg / 900 lbs.

Product Weight

A694-05 (8ft)

A694-9-05 (9ft)

234 kg / 515 lbs.

240.5 kg / 530 lbs.

Overall Dimensions (L x W x H)*

A694-05 (8ft)

A694-9-05 (9ft)

204.5 x 187 x 256.5 cm /

80.5” x 73.5” x 101”

204.5 x 187 x 287 cm /

80.5” x 73.5” x 113”

Weight Horn Diameter

(Weight Plate Storage)

47.63 mm / 1.875”

* Ensure a minimum clearance width of 0.6 meters (24”) for access to

and passage around MATRIX strength equipment. Please note, 0.91

meters (36”) is the ADA recommended clearance width for individuals

in wheelchairs.

WARRANTY

For North America, please visit www.matrixtness.com

for warranty information along with warranty exclusions

and limitations.

PROPER USAGE

1. Do not exceed weight capacity of this

equipment.

2. If applicable, set safety stops to

appropriate height.

3. If applicable, adjust seat pads, leg

pads, foot pads, range of motion

adjustment, or any other type

of adjustment mechanisms to a

comfortable start position. Make

certain that the adjusting mechanism is

fully engaged to prevent unintentional

movement and to avoid injury.

4. Sit on bench (if applicable) and get into

appropriate position for exercise.

5. Exercise using no more weight than

you can safely lift and control.

6. In a controlled manner, perform

exercise.

7. Return weight to its fully-supported

start position.

Need help?

Do you have a question about the Matrix MAGNUM MG-A694-05 and is the answer not in the manual?

This document describes the MATRIX MAGNUM SERIES MG-A694-05 / OPEN RACK, a robust piece of strength training equipment designed for professional and supervised environments.

Function Description:

The MG-A694-05 / OPEN RACK is a versatile strength training rack primarily used for free weight exercises such as squats, bench presses, and overhead presses, offering a secure and stable platform for users. It features multiple uprights with adjustable catches and safety stops, allowing for a wide range of exercise variations and user heights. The rack also includes integrated weight plate storage horns, promoting an organized and efficient training space. The design emphasizes user safety through its sturdy construction and the requirement for proper setup and usage, including the use of safety stops and spotters. It is intended for use in supervised areas where access and control are regulated by the owner, considering the user's reliability, age, and experience.

Important Technical Specifications:

Maximum User Weight: 181.5 kg / 400 lbs.
Maximum Training Weight: 408.5 kg / 900 lbs.
Product Weight:
- A694-05 (8ft): 234 kg / 515 lbs.
- A694-9-05 (9ft): 240.5 kg / 530 lbs.
Overall Dimensions (L x W x H):
- A694-05 (8ft): 204.5 x 187 x 256.5 cm / 80.5" x 73.5" x 101"
- A694-9-05 (9ft): 204.5 x 187 x 287 cm / 80.5" x 73.5" x 113"
Weight Horn Diameter (Weight Plate Storage): 47.63 mm / 1.875"
Minimum Clearance Width: A minimum clearance width of 0.6 meters (24") is required for access and passage around the equipment. For individuals in wheelchairs, 0.91 meters (36") is the ADA recommended clearance width.
Anchor Point Pull-out Force: All anchor points must withstand 750 lbs. (3.3 kN) pull-out force.
Bolt Torque: All bolts should be tightened to 30 ft-lbs.

Usage Features:

The MG-A694-05 / OPEN RACK is designed for safe and effective strength training with several key usage features:

Adjustable Safety Stops: Users must set safety stops to the appropriate height for their exercise to prevent injury from dropped weights. It's crucial to ensure these stops are fully engaged. For squats on a Smith Press, stops should never be placed below the height indicated on the equipment.
Adjustable Catches: The lifting bar catches are adjustable, allowing users to position the barbell at a comfortable and safe starting height. Visual confirmation that catches are fully engaged and seated in the hooks is required before releasing the load.
Integrated Weight Storage: Multiple weight horns are provided for convenient and organized storage of weight plates, contributing to a tidy and safe training environment.
Chin Bar: A chin bar is included, offering an additional exercise option for upper body strength.
Spotter Requirement: The manual strongly emphasizes the use of a spotter when working out with free weights on this equipment to enhance safety.
Controlled Movement: Users are instructed to perform exercises in a controlled manner and return weights to their fully-supported start position.
Weight Capacity Adherence: Strict adherence to the maximum user and training weight capacities is essential to prevent equipment damage and injury.
Proper Adjustment: Any adjustable mechanism (stop position, seat position, pad location, range of motion limiter, pulley carriage, or any other type) must be fully engaged to prevent unintended motion.
Supervised Use: The equipment is intended for supervised areas, with access controlled by the owner based on user reliability, age, and experience.

Maintenance Features:

Regular maintenance is crucial for the longevity and safe operation of the MG-A694-05 / OPEN RACK.

Daily Maintenance:
- Clean Upholstery: Use a mild soap and water or a non-ammonia based cleaner.
- Inspect Cables: Check for any signs of wear or damage.
Monthly Maintenance:
- Clean Guide Rods: Lubricate with Teflon-based lubricant, applying it to a cotton cloth and then up and down the guide rods.
- Inspect Hardware: Check all bolts and fasteners for tightness and wear.
Bi-Annually Maintenance:
- Inspect Frame: Check the structural integrity of the frame.
As Needed Maintenance:
- Clean Machine: General cleaning as required.
- Clean Grips: Use a mild soap and water or a non-ammonia based cleaner.
Preventative Maintenance: This is key to smooth operation and minimizing liability. Equipment should be inspected at regular intervals.
Damaged Parts: Do not use any equipment with damaged or worn parts. Only use replacement parts supplied by a local MATRIX dealer.
Labels and Nameplates: Do not remove labels; replace them if damaged or unreadable, as they contain important safety information.
Qualified Personnel: Only qualified persons should make adjustments, perform maintenance, or repair the equipment. MATRIX dealers can provide service and maintenance training.
Securing Equipment: Manufacturer recommends securing the equipment to the floor by a licensed contractor to prevent rocking or tipping over. If not secured, resistance straps, ropes, or other means should NEVER be attached, nor should the equipment be used for stretching, as this may result in serious injury.