Matrix MW001 - Rinse Aid System Usage; Rinse Aid Compartment Refill; Adjusting Rinse Aid Dosage

Rinse Aid
To fill the rinse aid compartment
1. Open the rinse aid compartment by turning and removing the cap as
shown in figure5.
2. Fill the rinse aid compartment until the rinse aid indicator goes dark,
 asshowningure6(where“a”indicatesthecompartmentisempty,and
“b” indicates the compartment is full).
3. Replacethecap,ensuringthemarkersonthecaplineupwiththe 
compartment prior to screwing the cap back in place.
Rinse Aid Adjustment
Thelevelofrinseaiduseispresetto3.Youcanadjustthelevelofrinseaid
usebyadjustingasshowningure7.
If water stains form on the dishes after a wash, the level should be increased.
If blue stains which can be wiped away are left on the dishes after a wash, the
level should be decreased.
Please note: Rinse aid ensures better quality wash results and
increased drying performance.
fig. 5
g.6
g.7
6
6
5
4
3
2
1
a
b
6
5
4
3
2
1