Why won't my Matrix MW200 programme start?
The programme might not start because the water tap is turned off, the dishwasher door isn't fully closed, the mains inlet hose is kinked or trapped, or the water inlet filter or the machine filters are blocked. Check the plug, fuse, and circuit breakers of the mains supply.
What to do if the Matrix MW200 Dishwasher wash performance is of a low standard?
Low wash performance can be caused by poor loading of dishes, insufficient detergent, an inappropriate wash programme, a blocked spray arm, clogged or incorrectly fitted filters, or a blocked water drain pump.
Why is there water remaining inside my Matrix MW200 Dishwasher at the end of a programme?
If water remains inside the dishwasher, the water drain hose might be blocked or kinked, or the filters might be blocked.
Why are there white stains on the dishes from my Matrix MW200?
White stains on dishes can occur due to insufficient detergent, a rinse aid setting that is too low, insufficient dishwasher salt, a water softener setting that is too low, or a salt compartment cap that isn't completely closed.
Why are the dishes not completely dry in my Matrix MW200 Dishwasher?
Dishes might not be completely dry if a programme without a drying stage was selected, the rinse aid setting is too low, or the dishes were unloaded too soon. Allow sufficient drying time.
How to fix inadequate water supply in Matrix MW200 Dishwasher?
Ensure the water inlet tap is fully open. Close the water tap, separate the water inlet hose from the tap, and clean the filter. Restart your machine. If the error continues, contact Customer Care.
What causes rust stains on dishes in Matrix Dishwasher?
Rust stains on dishes can be caused by keeping different sets of cutlery together, too much salt (water softener setting too high), a salt compartment cap that's not completely closed, or a poor appliance earth (check mains electrical supply).
What to do if alarm is active against water overflow in Matrix Dishwasher?
Turn off the dishwasher and disconnect the water supply. Contact Customer Care.
What to do if the waste water in Matrix MW200 cannot be discharged?
If the waste water cannot be discharged, it might be because the drain hose is blocked, or the filters of your machine might be blocked. Restart the dishwasher and cancel the programme. If the error continues, contact Customer Care.
What to do if Matrix MW200 Dishwasher has continual fill error?
Close the tap and contact Customer Care.
General| Door color | Gray |
|---|---|
| Control type | Buttons |
| Product size | Slimline (45 cm) |
| Built-in display | Yes |
| Custom panel-ready | - |
| Appliance placement | Fully built-in |
| Baskets adjustable placement | Upper |
| Cycle time | - min |
| Noise level | 52 dB |
| Dishwashing programs | Eco, Intensive, Pre-wash |
| Number of place settings | 10 place settings |
| Number of washing programs | 3 |
| Connected load | 1900 W |
| Water consumption per cycle | 11 L |
| Energy consumption per cycle | 0.73 kWh |
Weight and Dimensions| Depth | 570 mm |
|---|---|
| Width | 448 mm |
| Height | 818 mm |
| Installation compartment height (max) | 870 mm |
Essential safety advice for appliance use, door handling, and detergent.
Guidelines on children's use, electrical safety, and responsible product disposal.
Appliance model/serial number fields, EU compliance, and manual availability.
Tips for reducing energy/water consumption and proper dish loading.
Steps for initial setup, including salt, rinse aid, and running the machine.
Explanation of the power button, programme selection, and indicator lights.
Instructions on starting, changing, and cancelling dishwasher programmes.
Procedures for switching off the appliance and notes on programme continuity.
Instructions on how to add detergent and recommended usage guidelines.
Steps to fill the salt compartment and notes on initial salt addition.
Guide on how to test water hardness using a strip and understanding the results.
Instructions on how to adjust the water hardness level using the control panel.
Instructions for filling the rinse aid compartment and adjusting its dosage.
Steps to adjust the height of the upper dishwasher basket.
Visual guidance on best practices for loading the lower and upper baskets.
Details on place settings, basket positioning, and cup placement.
Information on detergent/rinse aid dosage and test programme parameters.
Table outlining programmes, soil levels, detergent, duration, and consumption data.
Instructions for cleaning door seals and the dishwasher's filter system.
Guidance on cleaning spray arms and the dishwasher interior.
Table detailing error codes displayed by programme indicators and their meanings.
A guide to common issues, their possible causes, and recommended solutions.
Information on the appliance's fused plug, fuse replacement, and alternative plug connection.
Details on wire connections, consulting an electrician, and power cord replacement.
Advice on appliance placement, levelling, water supply, and drain connections.
Instructions for connecting the drain and inlet hoses correctly for optimal performance.
Visual guides for plumbing connections and fitting the appliance into cabinetry.
Steps for fitting non-standard decor doors, including template use and hinge adjustment.
Detailed technical specs including energy, water consumption, noise, and efficiency class.
To Next Page
