What to do if my Matrix MW401 programme will not start?
If your Matrix Dishwasher programme isn't starting, consider these possibilities: * The water tap might be off—make sure it's turned on. * The dishwasher door might not be fully closed—ensure it is. * The water inlet filter or machine filters could be blocked—clean them.
How to fix a Matrix MW401 door that won't open or close properly?
If your Matrix Dishwasher door isn't opening or closing correctly, it could be that the door tension isn't correctly adjusted for the decor door. Adjust the door tension accordingly.
Why is my Matrix MW401 wash performance so low?
Low wash performance in your Matrix Dishwasher can stem from several issues: * Dishes may be poorly loaded, hindering proper cleaning—rearrange them for optimal loading. * You might not be using enough detergent—add the recommended amount. * The selected wash programme may be inappropriate—choose the correct one. * A blocked spray arm can also reduce performance—ensure it's clear. * Clogged or incorrectly fitted filters—check and correctly fit them. * A blocked water drain pump—clear the blockage.
Why are there white stains on my Matrix MW401 dishes?
White stains on dishes from your Matrix Dishwasher can occur due to: * Insufficient detergent—add more. * Rinse aid setting being too low—increase it. * Insufficient dishwasher salt—add more. * Water softener setting being too low—adjust it. * The salt compartment cap not being completely closed—ensure it's securely closed.
What to do if my Matrix MW401 stops mid-cycle?
If your Matrix Dishwasher stops during a cycle, it could be due to: * A power failure—check for power loss. * A water inlet failure—check the water inlet. * The programme being on standby—investigate the programme status.
Why are my Matrix MW401 Dishwasher dishes not drying completely?
If your Matrix Dishwasher dishes aren't drying fully, it could be because: * You selected a programme without a drying stage—choose one with a drying stage. * The rinse aid setting is too low—increase it. * You're unloading dishes too soon—wait before unloading.
What to do if water remains in my Matrix Dishwasher after the cycle?
If water remains in your Matrix Dishwasher after a cycle, it might be due to: * A blocked or kinked water drain hose—check for blockages or kinks. * Blocked filters—clean them.
Why are there rust stains on my Matrix MW401 Dishwasher dishes?
Rust stains on dishes in your Matrix Dishwasher may be caused by: * Mixing different sets of cutlery—store them separately. * Too much salt due to a high water softener setting—reduce the setting. * The salt compartment cap not being completely closed—ensure it's closed securely. * A poor appliance earth—check the mains electrical supply.
General| Door color | Not applicable |
|---|---|
| Built-in display | Yes |
| Appliance placement | Fully built-in |
| Control panel color | Stainless steel |
| Cycle time | 160 min |
| Noise level | 52 dB |
| Delayed start timer | - |
| Dishwashing programs | Eco, Intensive, Pre-wash |
| Number of place settings | 12 place settings |
| Number of washing programs | 4 |
| Washing class | A |
| Annual water consumption | 3360 L |
| Annual energy consumption | 273 kWh |
| Current | 13 A |
| Power consumption (off) | 0.05 W |
| Water consumption per cycle | 12 L |
| Energy consumption per cycle | 0.95 kWh |
Weight and Dimensions| Width | - mm |
|---|
Details required for warranty registration and customer care assistance.
Statement confirming compliance with relevant EEC directives.
Information on correct disposal according to EC Directive 2002/96/EC.
Advice on reducing energy and water consumption.
Essential steps before operating the dishwasher for the first time.
Explanation of buttons, programme display, and indicator lights.
Meaning of warning lights for salt/rinse aid and end-of-programme notification.
Step-by-step instructions for initiating a wash cycle.
What happens when a cycle completes and how it is indicated.
Procedure to switch to a different programme mid-cycle.
Steps to abort a currently running wash cycle.
Correct method for powering down the dishwasher.
Instructions on how to correctly add detergent to the designated compartment.
A detailed guide for refilling the salt compartment for water softening.
Method for using a test strip to determine water hardness.
Procedure to configure the dishwasher's water hardness level via indicator lights.
Instructions for replenishing the rinse aid reservoir.
How to modify the amount of rinse aid used per cycle.
Steps to change the vertical position of the upper dishwasher basket.
Visual guidance on optimal placement of dishes in baskets.
Information on the total number of place settings the dishwasher can hold.
Recommended quantities for detergent and rinse aid dosage.
Data related to the programme used for compliance testing.
Details of each programme, including stages and duration.
Measured consumption figures for electricity and water per programme.
How to clean the door seals to ensure proper closure and hygiene.
Step-by-step instructions for cleaning the microfilter and base filters.
Guide to removing and cleaning the spray arms for optimal water distribution.
Methods for removing internal dirt, oil, or limescale buildup.
Understanding the diagnostic codes displayed by the dishwasher.
Advice and solutions for specific error code indications.
Troubleshooting common problems like failure to start or stopping mid-cycle.
Addressing problems with wash performance, stains, or incomplete drying.
Instructions for safely changing the fuse in the appliance's power plug.
Guidance on attaching a compatible alternative plug if needed.
How to correctly connect the power cord wires to the plug terminals.
Notes on power cord condition and socket accessibility.
Steps for connecting the water supply and drainage hoses.
Instructions for adjusting the dishwasher's feet for proper leveling.
Measures to prevent siphoning of water from the waste pipe.
Specification that the appliance requires only a cold water connection.
Guidance on applying the template for correct door panel alignment.
Method for determining the correct offset for the integrated door panel.
To Next Page
