EasyManua.ls Logo

Matrix MW401 - Usage Recommendations; Tips for Efficiency; Initial Setup Guide; Preparing for First Use

Matrix MW401
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
When the dishwasher is not in use, we reccomend that you turn off the
water supply at the supply tap and disconnect the main supply.
If you are leaving the dishwasher for an extended period you should leave
the door slightly open to prevent the formation of unpleasant smells.
The plastic housing on the water inlet pipe contains an electrically
operated valve. The wires that connect to this valve are inside the inlet
hose. Do not cut through the inlet hose, and do not put the plastic
housing in water.
Children could get locked inside the appliance. Therefore when disposing
of an old appliance, cut off the plug and set aside, and damage the door
lock so that the door can no longer be closed.
Recommendations
To reduce energy and water consumption, remove all dirt residues from
the dishes prior to loading the dishwasher.
Only run the dishwasher when fully loaded.
Place hollow items (bowls, glasses and pans) face down in the basket.
Do not put dishes or cutlery with tobacco ash, wax, lubricating grease or
paint residues in the dishwasher.
Before First Use
Set the water softener level as required by the water hardness in the area.
Add 2kg of salt into the salt compartment and then fill with water to the
top of the salt compartment.
Remove all the packaging materials from the interior of the dishwasher.
Fill the rinse aid compartment.
Run a hot programme without any dishes in the dishwasher.

Related product manuals