Matrix MW401 User Manual

5
Control Panel
Power button (1)
To switch the dishwasher on or off, press the power button (1). When you
switch on the dishwasher, the end of programme light will illuminate, and
two dashes will appear on the display.
Programme display (2)
The programme display shows the selected programme and the remaining
time to run. If there is a fault on the dishwasher, the fault code will show on
the display.
Programme selection button (3)
To select a programme, press the programme selection button (3). The
dishwasher will store in its memory the last programme used.
Programme indicator lights (4)
These lights will illuminate to confirm which programme has been selected.
programme
salt
rinse aid
end
P1 P2 P3 P4
Fig. 1
programme
salt
rinse aid
end
MW401
50°C economy
P1 P2 P3 P4
prewash65°C intensive 65°C express

Matrix MW401 Specifications

General

Door color	Not applicable
Built-in display	Yes
Appliance placement	Fully built-in
Control panel color	Stainless steel
Cycle time	160 min
Noise level	52 dB
Delayed start timer	-
Dishwashing programs	Eco, Intensive, Pre-wash
Number of place settings	12 place settings
Number of washing programs	4
Washing class	A
Annual water consumption	3360 L
Annual energy consumption	273 kWh
Current	13 A
Power consumption (off)	0.05 W
Water consumption per cycle	12 L
Energy consumption per cycle	0.95 kWh

Weight and Dimensions

Width	- mm