Matrix MX-PG F1 3000 - Page 12

12
10.1.4 Remove the ignition plug and check its
condition.
10.1.5 If the generator still does not function,
contact your dealer.
10.2 MALFUNCTION: The generator does not
generate any power.
10.2.1 Use a bulb to check.
10.2.2 Check, if the AC protection switch is set to
ON.
10.2.3 If the generator still cannot generate any
power, contact your dealer.
11. ARRANGEMENT OF LABELS
Items to keep in mind:
This sticker warns persons how to safely operate
the unit. Carefully read the sticker before use.
Acoustic power level LwA: 96dB
Specied values indicate the emission
level and are not necessarily safe levels
for work.
Because there is a connection between emission
and immission levels, it cannot be reliably used
to determine additional precautions, if required.
Factors influencing the current immission level
of working power include characteristics of the
working room, other sources of noise, etc., such
as number of machines and other contiguous
processes, as well as the time period a user
is subjected to noise. Also, the permissible
immission level can be dierent in each country.
However, this information will provide the
operator of the machine the possibility to better
evaluate risks and dangers.
12. Transport
Close the engine switch/fuel cock and the tank
ventilation to avoid leakage of gasoline. Always
place the device on solid ground, and always use
it at a well-ventilated location. Use the handle to
move the power generator via transport wheels.
Make sure the ground is at. Obstructions on the
ground can cause damage to parts of the power
generator.
13. CLEANING
1. Keep your machine clean. Clean the machine
cover with a damp, soft cloth. Use a mild
detergent. Never rinse the machine with water.
2. Do not use any solvents containing benzene,
trichloroethane, chlorine, and ammonia.
3. Use a vacuum cleaner to clean the generator's
grill.
4. Wear safety goggles during cleaning.
Reminder
Throttle operation
Grounding sticker
Carefully read the instructions
before use.
“Caution: Hot” sticker
The surface temperature is hot; do
not touch!
Reminder for adding lubricating
oil
Before using the unit, check
the lubricating oil and rell, if
necessary.