Matrix PGT 4 in 1-S - Environmental Protection

49
Cutting thread is not
adjusted
- Thread spools empty - Replace the spools of thread
The pole-mounted
powered pruner unit
does not saw, pluck or
vibrate
- Chain tension too high
- Chain dull!
- Chain installed incorrectly
- Worn out the chain
- Check and adjust chain tension
- Regrind or replace chain
- Ret the chain
- Renew the chain
Saw chain gets hot or
saw chain lubrication
does not work
- No oil in the tank
- Oil supply clogged
- Chain tension too high
- Chain dull
- Rell oil
- Clean the oil supply line
- Set chain tension
- Regrind or replace chain
12. Environmental protection
Do not simply dispose of the device,
accessories and packaging in the dustbin,
but carry it to an environmentally friendly
recycling. It is therefore best to bring
unused devices to a material yard in your area.
This little eort benets our environment.