Matrix S-FORCE SPT - Preventative Maintenance; Care and Maintenance Instructions; Lubricating the Magnets

6

CHAPTER3:PREVENTATIVEMAINTENANCE
 3.1CareandMaintenanceInstruction
1)Anyandallpartremovalorreplacementmustbeperformedbyaqualifiedservicetechnician.
2)DONOTuseanyequipmentthatisdamagedandorhaswornorbrokenparts.
Useonlyreplacementpartssuppliedbyyourcountry’slocalMATRIXdealer.
3)MAINTAINLABELSANDNAMEPLATES:Donotremove
labelsforanyreason.Theycontain
importantinformation.Ifunreadableormissing,contactyourMATRIXdealerforareplacement.
4)MAINTAINALLEQUIPMENT:Preventativemaintenanceisthekeytosmoothoperatingequipment
aswellaskeepingyourliabilitytoaminimum.Equipmentneedstobeinspectedatregular
intervals.
5)
Ensurethatanyperson(s)makingadjustmentsorperformingmaintenanceorrepairofanykindis
qualifiedtodoso.MATRIXdealerswillprovideserviceandmaintenancetrainingatourcorporate
facilityuponrequest.
 3.2LubricatingtheMagnets
1)Useacointoturnthereleasescrew90˚clockwise.
2)Removeplasticcover.
3)Spraythemagnetareasasshown.Sprayeachareaforabout0.5second(oraround0.25ccofoil
quantity).Matrixrecommendschaingreaseforlubrication.
4)Replaceplasticcoverandturnreleasescrew90˚
counter‐clockwisetosecureplasticcover.
ACTION FREQUENCY
Cleanentiremachineusingwaterandamildsoaporother
Matrixapprovedsolution(cleaningag entsshouldbealcohol
andammoniafree).
DAILY
Removethebackcover.Checkfordebrisandcleanwitha
dryclothorsmallvacuumnozzle.
MONTHLY
Lubricatemagnets EVERY6MONTHS
MAI NTENA NCESCHEDULE