Matrix SATATYA NVR6404X User Manual

21 Matrix SATATYA NVR Quick Start
4. Fix the clamp fitted Hard disks on the bottom plate with screws available at the rear and side
panel.
Maximum torque to be applied for tightening the screws is 3 kgf.cm. Applying more
than specified torque will cause a damage to the HDD and the clamp.
Similar alignment can be done in NVR6408X with the eight Hard Disks as shown below.
NVR6408X

Matrix SATATYA NVR6404X Specifications

General

Brand	Matrix
Model	SATATYA NVR6404X
Category	DVR
Language	English