What your Package Contains
Know your Camera
Powering the Camera
Accessing via Web Browser
6
Camera Variants
Installation
Network Configuration
Accessing Reset Switch
Technical Specification
Ingress Protection Accessory Installation
Figure 1
Contents
Please read this guide first for correct installation and retain it for future reference. The
information in this guide is prevailing at the time of publication. However, Matrix Comsec
reserves the right to make changes in product design and specifications without prior
notice.
Copyright
All rights reserved. No part of this document may be copied or reproduced in any form or
by any means without the prior written consent of Matrix Comsec.
Warranty
Limited Warranty. Valid only if primary protection is provided, mains supply is within limit
and protected, and environment conditions maintained within product specifications.
Complete warranty statement is available on our website:
www.matrixvideosurveillance.com
Things you will Need
Installing Mounting Template
Mounting the Bottom Enclosure
Adjusting Camera Angle
Know your Camera
1. Cable Guide
2. Cable Assembly
3. Front Glass Cover
4. Trim Ring
5. Enclosure Bottom
6. Enclosure Top
7. Hole for Mounting
9
10
7
7
12
13
17
18
21
22
7
23
27
6
7
2
1
3
4
5
6
Mounting the Camera
15
5
To Next Page
Loading...
