3
STRENGTH: PREVENTIVE MAINTENANCE AND CLEANING CHECKLIST
The checklists below are maintenance recommendations beyond the daily cleaning of the equipment.
Revision Date: December 2022
MATRIX SINGLE STATIONS: AURA, ULTRA, VERSA AND VERSA DUALS
QUARTERLY OR BI-ANNUALLY
Facility Staff Tasks Q1 Q2 Q3 Q4
Wipe entire frame and pads with approved cleaner
Clean and lubricate guide rods with approved lubricant
Matrix-Certified Technician Tasks
Visually inspect hardware for tightness
Inspect belts/cables for damage
Check belts/cables for proper tension
Inspect pulleys for damage
Perform a few reps with weight. Listen for noise, check smoothness
Check rep counter/console for proper operation*
Test push/pull pins for proper operation – ensure they are tightly secured to the frame then clean and grease
Clean and grease all tie rod ends (see picture at right)
*Ultra and Versa use 2-AA batteries.
Facility Staff Tasks Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Wipe entire frame and pads with approved cleaner
Clean and lubricate guide rods with approved lubricant
Matrix-Certified Technician Tasks
Visually inspect hardware for tightness
Inspect belts/cables for damage
Check belts/cables for proper tension
Inspect pulleys for damage
Perform a few reps with weight.
Listen for noise, check smoothness
Check rep counter/console for proper operation*
Test push/pull pins for proper operation – ensure they
are tightly secured to the frame then clean and grease
To Next Page
Loading...
Need help?
General
