Matrix T3xm Service Manual

4
CHAPTER 2:
PREVENTATIVE MAINTENANCE
they are repaired. Ensure that any person(s) making adjustments or performing maintenance or repair
of any kind is qualified to do so. Matrix Fitness Systems will provide service and maintenance training
at our corporate facility upon request or in the field if proper arrangements are made. and surrounding
areas. Be careful not to hit any of the wire connections.
2.3 Preventative Maintenance
Preventative maintenance is the key to smoothly operating equipment, as well as keeping the user's liability
to a minimum. Equipment needs to be inspected at regular intervals. Defective components must be
replaced immediately. Improperly working equipment must be kept out of use until it is repaired. Ensure that
any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
EVERY DAY (DAILY)
Clean and inspect, following these steps:
•
Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.
•
Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use
solvents, as they can cause damage to the treadmill.
•
Inspect the power cord. If the power cord is damaged, stop using and contact Customer Technical
Support.
Make sure the power cord is not underneath the treadmill or in any other area where it can
become pinched or cut.
•
Check the tension and alignment of the running belt. Make sure that the treadmill belt will not
damage any other components on the treadmill by being misaligned.
•
If any labels are damaged or illegible, contact Customer Technical Support for replacements.
EVERY WEEK (WEEKLY)
Clean underneath the treadmill following these steps:
•
Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall
outlet. Fold the treadmill into the upright position, making sure that the lock latch is
secured.
•
Move the treadmill to a remote location.
•
Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
treadmill. Return the treadmill to its previous position.
EVERY MONTH • IMPORTANT!
Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.
•
Inspect all assembly bolts of the machine for proper tightness.
•
Remove the motor cover. Wait for ALL display screens to be off.

Matrix T3xm Specifications

General

Brand	Matrix
Model	T3xm
Category	Treadmill
Language	English