5
TENSIONING THE BELT PROCEDURE
Caution:
Over-tightening of the roller will severely shorten the life of the belt and may
cause further damage to other components.
Running Belt:
If when you plant your foot on the belt, you can feel a slipping sensation then
the belt has stretched and is slipping across the rollers. This is a normal and
common adjustment on a new treadmill. To eliminate this slipping, tension
both the rear rollers Allen bolts 1/4 TURN as shown above. Try the treadmill
again to check for slipping. Repeat if necessary, but NEVER TURN the roller
bolts more than 1/4 turn at a time.
Perfect Tension of Running Belt:
Perfect Tension of Running Belt:
0.9~1.1 lbs
0.9~1.1 lbs
Frequency: Every 1 months
To Next Page
Loading...
