HAPTER 3: Part Replacement Guide
3.4 RUNN ING DECK REPLACEMENT
1) Remove the motor cover as outlined in Section 3.1.
2) Remove rear roller as outlined i n section 3.2
3) Remove the side rail as outline in Section 3.3.
4) Remove the running deck 8 bolts and ground strap.
5) Remove the running deck from the frame.(F ig-1)
6) Reverse steps 1-5 to install a new running deck.
Fig-1
Note:
1. The running deck is silicon on one side on TF30/TF50. N w deck surfaces must ALWAYS be matched to
a new running belt and only T70-02 models is paraffin waxed deck only 1ide.
2. For the ADJUSTIN G THE RUN NING BELT reference section 3.6 note 2
23
To Next Page
Loading...
