To connect to a Wi-Fi network:
1. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
2. Press the “Machine Settings” button.
3. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
4. Touch on the “Network Setup” tab.
5. Locate and touch on the SSID desired in the Available Networks table.
6. Enter the Wi-Fi password.
7. IP Address, Subnet Mask, and Gateway fields will populate, indicating the internet connection is
complete.
Once Wi-Fi settings are fully configured for a site, the settings can be exported to a USB drive and used
to set up additional consoles identically.
To export Wi-Fi settings:
Once configured on one console, Wi-Fi connection settings can be transferred to other consoles with a
USB drive – this is useful if the SSID or password are unknown.
1. Prepare a USB drive.
2. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
3. Press the “Machine Settings” button.
4. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
5. Touch on the “Network Setup” tab.
6. Touch on the “Export Settings” button.
When the console indicates “Export Successful”, the USB can be removed.
This method can also be used as a shortcut to create the appropriate file structure on the USB drive.
To import Wi-Fi settings:
To Next Page
Loading...
