To modify the console’s Facility ID:
1. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
2. Touch on the “Machine Settings” button.
3. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
4. Touch on the “General” tab.
5. Set the “Facility ID” as needed.
To modify the DAPI Environment:
1. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
2. Touch on the “Machine Settings” button.
3. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
4. Touch on the “General” tab.
5. Set the DAPI Environment as needed.
Internet/RSCU update
Matrix cardio equipment can communicate with a central server known as “Remote Software Console
Update”, or RSCU. When properly configured, consoles can download software from this server to
update. Consoles can be set up to automatically check for updates daily or check for updates on
command, when needed. A console must be connected to the internet to receive RSCU updates.
To set consoles to automatically check for updates daily:
1. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
2. Touch on the “Machine Settings” button.
3. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
4. Touch on the “Update” tab.
To Next Page
Loading...
