Matrix VS-S71 - Stack & User Frame Assembly: Step 4

13
PART 1: STACK & USER FRAME ASSEMBLY
STEP 4 | WEIGHT STACK TO USER FRAME ASSEMBLY INSTRUCTIONS & NOTES
4
5
15
14
13
ID DESCRIPTION QUANTITY
4 M10 Flat Washer 4
5 M10 Nylock Nut 2
13 CAM Support Tube 1
14 M10 X 105 SHC 2
15 Narrow Cupped Flange 1
ASSEMBLY
Install the user frame hardware as shown.
Torque all M10 hardware from pages 10, 11 & 13 to: 77N-m/57 ft-lbs.