Matrox TripleHead2Go Digital Edition - Page 20

20 Matrox TripleHead2Go – User Guide
5 Connect the second monitor
Use your monitor cable to connect your
second monitor directly to the third
connector ( ) on your Matrox product.
If your monitor has a DVI connector, use a
DisplayPort to DVI adapter (sold separately)
to connect your monitor to the connector.
Your Matrox product is now connected. Restart your computer and install your Matrox software (see
“Installing your Matrox software”, page 32).
Monitor cable
(DisplayPort)
Monitor cable
(DVI)
DisplayPort to DVI
adapter