matson BT900 - TEST PROCEDURES; OPERATING INSTRUCTIONS; IMPORTANT SAFETY AND OPERATION GUIDELINES

DIGITAL BATTERY TESTER
BT9002 |
TEST PROCEDURES / OPERATING
INSTRUCTIONS
IMPORTANT
WARNING: This product can expose you to chemicals including
arsenic, which is known to the State of California to cause cancer.
1. For testing 12 volt batteries, and for testing 12 and 24 volt charging systems.
2. Suggested operation range 0
º
C (32
º
F) to 50
º
C (122
º
F) in ambient temperature.
1. Working in the vicinity of a lead acid battery is dangerous. Batteries generate
explosive gases during normal battery operation. For this reason, it is of utmost
importance, if you have any doubt, that each time before using your tester, you read
these instructions very carefully.
2. To reduce risk of battery explosion, follow these instructions and those published by
the battery manufacturer and manufacturer of any equipment you intend to use in
the vicinity of the battery. Observe cautionary markings on these items.
3. DO NOT expose the tester to rain or snow.
For more information, go to www.P65Warnings.ca.gov.