Matsui DMZ-120 User Manual (English)

Questions and Answers:

A
Audrey BrownAug 13, 2025
How to fix a Matsui Dryer when the blower does not turn on?
- J
  Joseph MossAug 14, 2025
  If the blower in your Matsui Dryer doesn't turn on, there are several things you can check. First, ensure the disconnect or breaker is turned on. Then, inspect the fuse and replace it if necessary, and verify all power connections are secure. Also, make sure that no value is entered in the 'TIMER' mode. Check the contactor coil for 100V; if present, replace the magnetic contactor. If there's no voltage, it's best to contact Matsui Service. Try resetting the overload. Follow the Maintenance Instructions to check the contactor; if it's fine, replace the overload relay. Finally, check for any loose or shorted wires.
M
michaelodomAug 17, 2025
What to do if the drying temperature highest or lowest alarm in Matsui DMZ-120 Dryer?
- B
  barnespaulAug 17, 2025
  If the drying temperature in your Matsui Dryer is alarming high or low, first allow the dryer to complete its warm-up cycle and let the temperature stabilize. You should also install new filters. Check and correct any voltage problems. Address the issue by replacing the contactor or repairing the blower. Finally, replace or adjust the thermocouple.
K
Kimberly HarrisonAug 21, 2025
Why does the blower overload relay trip in my Matsui Dryer?