18
3. Never use abrasive pads to clean enameled, chromed or stainless steel
surfaces.
4. When using commercially available stainless steel cleaning products, avoid
cleaning any lettering or symbols, as they can become damaged.
Removing the door for easier cleaning
We recommend you have someone to assist you during removal of the door.
1. Open the door completely.
2. The door hinge has a small latch. Lift the latch on both hinges.
3. Lift the door slightly as if closing, and then with both hands supporting the
door, pull it away from the oven.
4. To replace the door, hold the door in an open position and insert the latches
on both hinges back into place. Open and close the door to make sure that it has
been fitted correctly.
Latch
To Next Page