B60 Voltage Optimisation Unit
5 | P a g e
Introduction
The matt:e B60 is a single phase Voltage Optimisation unit.
The unit reduces the incoming supply voltage by 18v (i.e.: a 240v supply
would be reduced to 222v). It is designed to be connected in series with the
incoming supply installed between the main electricity meter for the dwelling,
and the consumer unit.
The matt:e B60 has short circuit, overload and thermal protection built in.
Rated at 14kW, the unit is suitable for the majority of domestic and light
commercial / retail installations.
To Next Page
Loading...