The Matterport Pro2 Lite 3D Camera is sensitive and carefully calibrated. Always transport
your camera in a padded carrying bag or case and handle with care. When transporting in a
vehicle, ensure that the camera is secured and will not shift.
If traveling by air, we recommend keeping the camera in your carry-on luggage. If you must
transport the camera in checked luggage, use a hard, padded case with foam inserts. Always
ship your camera in the original padded shipping box provided by Matterport.
Treat your Matterport Pro2 Lite 3D Camera lenses as you would DSLR lenses. When
necessary, remove dust from your lenses using a small, bulb-style hand air pump with a soft
lens brush. Remove ngerprints from lenses with camera lens cleaner and a microber cloth.
Always clean by rst dusting the lens, then applying cleaner to the cloth (not directly to the
lens).
Do not use or leave the camera at very high temperatures. For example, in strong direct
sunlight or in a vehicle in extremely hot conditions. The battery performance will be degraded
and its service life will be decreased.
The camera should be stored at room temperature. If the camera is not used regularly, then
take it out once every 3 months and charge it. If in storage for longer than a year, then the
camera should be fully discharged and recharged.
Transporting Your Camera
Lens Care
Storage & Temperature
9 Care & Storage
To Next Page
Loading...
