Need help?Do you have a question about the Matterport PRO3 and is the answer not in the manual?
General| Camera Type | 3D Camera |
|---|---|
| Manufacturer | Matterport |
| Model | PRO3 |
| Scanning Technology | LiDAR |
| Field of View | 360° horizontal |
| Connectivity | Wi-Fi |
| Range | Up to 100 meters |
| Accuracy | ±20mm @ 10m |
| Capture Time | Less than 20 seconds per scan |
| Capture Speed | <20 seconds per position |
| Storage | internal storage |
| Compatibility | Matterport Cloud |
Details the physical parts of the Matterport Pro3 camera, including lens, battery, and tripod mount.
Instructions for setting up the tripod and adjusting its height to 4.5 feet (1.37 meters).
Guidance on screwing the tripod mount securely onto the tripod's center column.
Steps for safely removing the Matterport Pro3 camera from its protective case using the red tab.
Procedure for placing the camera on its side and aligning the battery pins for insertion.
Instructions on aligning the camera's tripod mount socket with the tripod column and securing it.
Steps to power on the Matterport Pro3 by pressing the power button and removing the lens cap.
Guide to downloading the Matterport app from the App Store or Google Play for Pro3 usage.
How to check if the camera is ready to pair, indicated by a 'Ready to Pair' symbol.
Ensuring Bluetooth is enabled on your device and the Matterport app has necessary permissions.
Instructions for opening the app, starting a new job, and selecting the Matterport Pro3.
Visual indicators for successful connection: 'Connected' and 'Ready to Scan' symbols.
Indicates the camera is connected to Wi-Fi.
Signifies the camera is prepared for rapid scanning between points.
A green line showing scan progress as the camera rotates.
Confirms the camera is ready to advance to the next scan point after completion.
Guidance on checking error codes via the Matterport app or go.mp/pro3.
Method to check the battery level by tapping the power button when the camera is off.
Recommendations for transporting the sensitive Matterport Pro3 camera in a padded case.
Proper methods for cleaning the Pro3 camera lens and spinning mirror using specialized cleaners.
Advice on avoiding high temperatures and storing the camera at room temperature with the battery removed.
Ensuring the camera operates on a flat, stable surface to prevent overturning and damage.
Advisories against disassembling the camera and using only recommended equipment and setup.
Warning to keep hands and objects away from the high-speed rotating mirror unit during operation.
To Next Page
