11
EN
Transporting Your Camera
The Matterport Pro3 Camera is sensitive and
carefully calibrated. Always transport your camera
in a padded carrying bag or case and handle with care.
If traveling by air, we recommend keeping the camera in
your carry-on luggage.
Lens Care
Treat your Pro3 Camera lens as you would DSLR lenses.
To remove ngerprints, use camera lens cleaner and a
microber cloth. Always clean by rst dusting the lens, then
applying cleaner to the cloth (not directly to the lens). The
spinning mirror requires the same care.
Storage and Temperature
Do not use or leave your Pro3 at very high temperatures.
The battery performance will be degraded and its service
life will be decreased. The camera should be stored at room
temperature with the battery removed.
Stability
Always ensure that the camera is operated correctly on a
at and stable surface. Personal injury or camera damage
may result if your Pro3 overturns.
General Use
Do not open or disassemble the camera.
The camera contains no user-serviceable
parts inside. Only use equipment and
accessories recommended by Matterport,
and follow the setup instructions in this guide.
Rotating Mirror
The rotating mirror spins at high speeds both
during a scan and for a short period after.
For your personal protection and to avoid
damage to your Pro3, keep hands, hair, or
any other objects at a safe distance from
the mirror unit while it’s rotating.
Care and Storage Safety Precautions
To Next Page
Loading...
