Mauldin 690-G - User Manual

24 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

OPERATIONS MANUAL

MODEL 690-G

Machine Serial Number: _ ______________________________

Specification Number: _ ______________________________

Engine Serial Number: _ ______________________________

SOLD & SERVICED BY:

Table of Contents

Questions and Answers

C
Cory MorganAug 11, 2025
What to do if Mauldin 690-G paver fails to move under power?
- W
  William ZunigaAug 11, 2025
  If your Mauldin Construction Equipment paver fails to move under power, several issues could be the cause. It might be due to an inadequate oil level in the hydraulic reservoir, so check and refill the oil level. Another potential cause is a broken or loose control cable, which would require replacing or tightening the control cable. Additionally, inadequate oil flow through the transmission suction filter could be the problem; inspect, clean, or replace the filter. Finally, a driveline mechanical failure could be the reason; inspect the driveline components and repair or replace as necessary.
W
wbrownAug 21, 2025
What causes excessive current draw in Mauldin 690-G?
- J
  Jennifer BeardAug 21, 2025
  If your Mauldin Construction Equipment shows excessive current draw, a possible cause is a short circuit. Inspect the system to identify and fix any short circuits.
M
melissahowellSep 1, 2025
Why does Mauldin 690-G paver move in neutral?
- N
  nicholasmanningSep 1, 2025
  If your Mauldin Construction Equipment paver moves in neutral, this could be due to a stroke control adjustment issue. Adjust the stroke control to correct this. Alternatively, the control cable might be damaged, in which case you should repair or replace it.

Mauldin 690-G Specifications

General

Brand	Mauldin
Model	690-G
Category	Construction Equipment
Language	English

Related product manuals