Mauldin M415XT MAINTAINER - Axle Programmed Maintenance

2/3/2020
Page 72 of 78
Calder Brothers Corporation
Model: M415XT Maintainer
M415XT
Axle Service
2. PROGRAMMED MAINTENANCE
2.1. OIL CHANGE AND PERIODICAL CONTROLS
Lubricants :
SAE 85W90 (API GL4) with additives for oil bath brakes
Examples of usable oils: Mobil Super Universal 20W40, Mobil Fluid 422, ELF SF3, AGIP MULTI
THT 80W
For axles with self-locking differential:
SAE 85W90 (API GL5) with additives for oil bath brakes and additives for self-locking differential (LS
Limited Slip).
Examples of usable oils: SHELL SPIRAX HD 85W90, FUCHS TITAN GEAR 85W90 LS, CASTROL
LSC SAE 90, ELF SF3
In both cases we recommend “Shell Donax TD”
Brake oil:
Use only “Agip ATF II D” mineral oil or alternatively ATF Dexron II oil for the braking system.
Grease:
We recommend using “Shell Retinax HDX2” grease.
The maintenance intervals mentioned are for a normal use of the vehicle; intervals should be shorter if
the vehicle is used for particularly hard work.
Job First intervention Routine maintenance
Changing axle oil 200 hours seasonal/ every 1000 hours (1)
Cleaning the magnetic oil drainage plug at the first oil change at every oil change
Checking and topping up the oil 100 hours monthly / every 300 hours (1)
Cleaning the oil breather 400 hours monthly / every 300hours (1)
Greasing (where envisaged) 200 hours (2) weekly / every 200 hours (1)(2)
(1) which of the two conditions occurs first
(2) 50 hours in the case of hard work