Maven 140IS User Manual

Maven 140IS Iron Station FAQ
Why is my Maven not producing steam?
- The Maven 140IS has a filter to help prolong the life of your iron station. Before first use, please
follow the instructions to soak your filter included in your manual or your quick start guide.
My Maven 140IS is making a chugging noise
- The Maven 140IS utilizes pump technology to deliver endless steam. The pump can make a
small noise when in operation. If the unit runs out of water or the filter is not soaked properly the
chugging noise will increase.
How many temperature settings does the Maven 140IS have?
- The Maven 140IS has 4 temperature settings.
1. Eco Mode – This is a mode safe for all fabrics
2. Dot 1 – Lowest setting, No Steam
3. Dot 2 – Medium/Low Setting, Low Steam
4. Dot 3 – Medium Heat, Medium Steam
5. Dot 4 – Max Heat and Steam
IMPORTANT: Before starting to iron, read the garment labels and follow the manufacturer’s ironing instructions.
Does the Maven 140IS have an auto-off?
- The Maven 140IS Iron Station is equipped with a 10-minute auto-off. To reengage the iron you
can move the iron or press any button. With fast heat-up technology, the Maven is ready in under
30 seconds.
Do I need to use distilled water?
- If you have really hard water, we suggest emptying the 1.5L water tank after use. This will ensure no
settled water clogs the unit. For best results, always use clean fresh water. The use of distilled water is
not required, but it will prolong the life of your iron.
How long does it take to heat up?
- The Maven Iron Station has fast heat-up technology and is ready in under 30 seconds!
How long is the power cord on the 140IS?
- The Maven 140IS power cord is 8’ long.
How long is the Steam cord on the 140IS?
- The Maven 140IS is equipped with a 60” Steam hose.

Maven 140IS Specifications

General

Brand	Maven
Model	140IS
Category	Iron
Language	English

Summary

Steam Production and Noise Troubleshooting

Filter Preparation for Steam

Soak the filter before first use to prolong the iron station's life and ensure proper steam generation.

Chugging Noise Explanation

The pump may make a small noise; this can increase if the unit runs out of water or the filter is not soaked properly.

Temperature Settings and Usage Guidance

Temperature Settings Overview

The Maven 140IS offers 4 temperature settings: Eco Mode, Dot 1 (Low), Dot 2 (Medium/Low), Dot 3 (Medium), Dot 4 (Max).

Garment Care Instructions

Always read garment labels and follow manufacturer's ironing instructions before starting.

Iron Station Features and Operation

Auto-Off Functionality

Features a 10-minute auto-off. Re-engage the iron by moving it or pressing any button.

Water Type Recommendation

Distilled water is not required but recommended for hard water areas to prolong unit life.

Heat-Up Time

The iron station features fast heat-up technology and is ready in under 30 seconds.

Cord Lengths

The power cord is 8' long, and the steam hose is 60".

Extended Use and Maintenance

Extension Cord Usage Policy

Not recommended; if necessary, use a cord with equal or greater ampere rating to avoid fire or shock.

Recommended Usage Duration

For domestic use only, recommended 4-6 hours per week to maximize the iron station's lifespan.

Residual Water in New Units

Units are 100% tested during production; residual water may be present.

Support and Warranty Information

Service Contact Details

Contact support@reliablecorporation.com or call 1-800-268-1649 for service inquiries.

Warranty Coverage

The 140IS Iron Station is warranted to be free of defects for one year.