Why is my Maverick MSC-30BR-WP Controller vehicle not moving?
If your Maverick Controller vehicle isn't moving, start by checking that both the transmitter and receiver are turned on. Next, ensure the batteries are correctly placed in the transmitter. Finally, make sure the main battery is adequately charged.
What to do if my Maverick Controller vehicle does not follow driving inputs?
If your Maverick Controller vehicle isn't responding to your commands, first ensure that both the transmitter and receiver are powered on. Also, verify that the transmitter's reverse switches are correctly configured and that the End Point Adjustments (EPA) are properly set. Finally, check the battery levels in both the transmitter and the car, replacing them or recharging as necessary.
How to fix front and rear wheels rotating in opposing directions on Maverick MSC-30BR-WP?
If the front and rear wheels of your Maverick Controller vehicle are rotating in opposite directions, it's likely due to incorrect differential placement. Ensure that the differential is inserted correctly.
General| Waterproof | Yes |
|---|---|
| Velocity Sensitivity | Yes |
| Aftertouch | No |
| Pads | 8 |
| Knobs | 4 |
| Transport Controls | Yes |
| Pitch Bend | Yes |
| Compatibility | Windows, macOS, iOS, Android |
| Type | MIDI Controller |
| Model | MSC-30BR-WP |
| Power Supply | USB |
| Input Voltage | 5V DC |
| Output | MIDI |
| MIDI I/O | USB |
| Power Source | USB |
Clarifies issues not covered by warranty, such as damage from accidents.
Guides users on how to handle warranty claims and contact the seller.
Instructions for cleaning and storing the model after use.
Lists tools recommended for maintenance and assembly.
Provides instructions and warnings for charging the battery pack safely.
Details on how to correctly insert AA batteries into the transmitter.
Step-by-step guide for connecting the main battery pack to the model.
Identifies and explains the functions of various switches and controls on the transmitter.
Explains how to operate the throttle trigger for forward, brake, and reverse.
Describes how to use the steering wheel to control the vehicle's direction.
Explains how to adjust the maximum steering movement.
How to reverse the steering or throttle direction.
How to adjust the maximum throttle and brake range.
Guides on adjusting steering and throttle trim for neutral positioning.
Correct procedure for powering on and off the transmitter and receiver.
Steps to pair the transmitter with the receiver for signal connection.
How to set up the fail-safe feature to prevent uncontrolled movement.
Procedures for setting up the speed controller for electric and nitro models.
Technical specifications for the transmitter and receiver.
Lists the key features and specifications of the speed controller.
Crucial warnings about incorrect connections, motor limits, and heat.
Instructions for selecting the correct battery mode for the ESC.
Explains the function and indication of low voltage cut-off protection.
Interprets the beep sounds and LED states on the ESC for status indication.
Describes ESC protection against overheating and throttle signal loss.
Basic tips and precautions for operating the RC vehicle.
Guides on cleaning, inspecting, and maintaining the vehicle after use.
Information on operating the vehicle in wet conditions and required maintenance.
To Next Page
