Maxell SSB-3 WB Quick Start Guide
SSB-3WB Quick Start Connecon Guide
This Quick Start Guide assumes that the SoundDeck has been removed from its carton, properly
posioned in place, and is ready to be connected to the source device. For more detailed
instrucons, please refer to the SoundDeck User Manual.
Step 1 – Acvate the Smart Remote Control
• Remove the protecve plasc insulator tab from the remote control’s baery compartment.
Step 2 – Connect AC Power to the SoundDeck
* Be sure to push the power cord
firmly into the AC socket on the
To Next Page
Need help?
General
