Note: For device cascading operation, see Bluetooth status/settings.
★Support "NFC" to quickly connect this device
① Search for the NFC function in the system settings of the mobile
phone and enable it;
② Align the NFC sensing area of the mobile phone with the NFC tag of
the device and touch it;
③ Touch the time for no less than 2 seconds; if there is no response to
the touch, please try again;
④ It is not recommended to use the NFC function after wireless
cascading;
⑤ This function is only available for some Android phones with NFC
function.
9
★ Support for a dual-device wireless cascade
To Next Page
Loading...
