maxilift M50 Series - Page 2

Fill in the space below with the required crane identification data.
Code filling example: M50.2H ELH
SERIAL NUMBER: ......................
MANUFACTURING YEAR: ...................
Mark the box regarding the accessories supplied with the crane
ACCESSORIES SUPPLIED WITH THE CRANE
Description YES NO
Electrical winch
Manual winch
Stabilizer
Back load attachment
Quick fitting kit
PRELIMINARY INFORMATION
Operator’s and Maintenance Manual of MAXILIFT M50 truck loader.
Manual code: MD.0.136 GB
This manual is valid starting from serial no: ....................
Manufacturer: NEXT HYDRAULICS S.r.l.
Via Mediterraneo 6, Boretto (RE)-ITALY
In this manual the word “Manufacturer” is referred to “NEXT HYDRAULICS S.r.l.”.
List of documentation supplied along with the loader:
¾ Operator’s and Maintenance Manual (for the end user)
¾ Installation Manual (for the installer and the end user)
ATTENTION
Always carefully read this manual before operating the loader. Most of the accidents occurred during
operations are caused by omission of elementary precautions and non fulfilment of the safety instructions.
Many accidents can be avoided when their causes are well known and relevant adequate
countermeasures are previously taken.
M50 2 H E L H
.
M50 2
.