Need help?Do you have a question about the maxilift 3300W and is the answer not in the manual?
This manual is divided into chapters to make its consultation easier.
Information on servicing instructions and load charts for safe operation.
Explains how to consult the manual and defines symbols used.
Details the available versions and optional features of the crane.
Describes how to identify the crane via serial number and model.
Specifies the crane's classification and its intended applications.
Lists forbidden operations and their consequences.
Outlines the required qualifications and knowledge for operators.
Guidelines for personal safety and protective equipment.
General rules for safe crane operation and maintenance.
Guidance on selecting a safe and stable operating location.
Choosing operating locations based on ground pressure capacity.
Maintaining safe distances from trenches and slopes.
Specifies minimum safe distances from overhead power lines.
Instructions for grounding the crane and loads to prevent static charge.
Details wind speed limits and effects on crane operation.
Safety guidelines for road travel and public site operations.
Operating procedures and safety tips for the winch system.
Additional rules for safe winch operations.
Information on wire rope inspection, precautions, and maintenance.
Lists the main components of the crane model.
Details the safety systems installed on the crane.
Describes the function of the relief valve.
Explains the function and checking procedure for holding valves.
Information on sealing of safety devices.
Overview of the crane's control system.
Description and operation of the remote control unit.
Details the crane's wiring system.
Essential precautions and checks before operating the crane.
Procedure for stabilizing the crane and truck.
Instructions for operating the mechanical outrigger jack.
Steps for extending the crane boom and hook.
Procedure for retracting the crane into its rest position.
Details on the winch system's capabilities and usage.
Checks required before moving the vehicle.
Common operational errors and their potential consequences.
Illustrates standard hand signals for crane operations.
Fundamental rules for operators before and during service.
Mandatory checks to be performed daily before operation.
Procedures for protecting and storing the crane.
Procedures for temporary crane storage.
Procedures for extended crane storage.
General warnings and precautions for maintenance activities.
Guidelines and common causes of damage during maintenance.
Schedule for routine maintenance tasks.
Specific checks to be performed daily.
Tasks to be performed monthly.
Checks to be performed every six months.
Other periodic checks and stability procedures.
Procedures for crane maintenance.
How to check and maintain the hydraulic oil level.
Procedure for changing the hydraulic oil.
Checking the wormgear assembly for proper backlash.
Procedure for greasing the boom sections.
Inspection and replacement of wear pads.
Table listing recommended greases and oils.
Daily and monthly inspection procedures for wire rope.
Criteria for replacing wire rope.
Guidance on lubricating wire rope.
Lists specifications for the standard crane equipment.
Provides electrical wiring diagrams for the crane.
Specific wiring diagram for the 3300W model.
Provides hydraulic diagrams for the crane.
Fields for installer details and contact information.
General| Brand | maxilift |
|---|---|
| Model | 3300W |
| Category | Lifting Systems |
| Language | English |
To Next Page
