Via Mediterraneo, 6 - 42022 - Boretto - Reggio Emilia - Italy
Tel. +39 - 0522-96 30 08 - Fax +39 - 0522-96 30 39
info@maxiliftcrane.com
- 1 -
1 FOREWORD
1.1 Remarks
This manual gives the guidelines for a correct, safe usage of the loader and its rational maintenance. When daily and
constantly applied, these guidelines ensure long service life with minimum maintenance costs, high performance of the
loader and good commercial value after years. Moreover, most of the frequent accidents during operation and servicing
are avoided. Once this manual has been read carefully, keep it in good conditions and quickly available close to the
loader.
ATTENTION
Should some or any part of this manual be not clear, please contact the Manufacturer
NOTE
The table on the back of the front page has to be filled at customer’s care. It contains all the necessary data
required when calling our Technical Service.
A copy of this manual is supplied along with every loader. Data, descriptions and pictures of this manual are not binding.
The Manufacturer reserves the right to change at any time all the items, components and parts deemed to be necessary
for product improvement or commercial or production needs..
2 HOW TO CONSULT THE MANUAL
2.1 Instructions
Always carefully read this manual before operating the loader.
The manual must be entirely read, except for chapter 6, whose paragraphs must be compulsorily read up to 6.5
inclusive. Paragraph 6.6 contains the instructions for use for all those units that may constitute the machine, and which
are represented in the picture of paragraph 3.3. To simplify reading this last one, it is necessary to determine all the
units making up one’s machine, and to read only the concerning sub-paragraphs. Actually, relevant legend includes the
corresponding sub-paragraph beside the name of every single unit.
Paragraph 6.7 contains the instructions for use for accessories, among which it is necessary to single out those
provided with one’s machine, in order to read relevant the sub-paragraphs. We suggest to cross all the parts of the
manual that do not apply to one’s loader.
In this manual the following symbols are used:
DANGER
Referred to dangers related to the described activity, when the safety of people is concerned.
ATTENTION
Referred to dangers related to the described activity, mainly when the safety of things is concerned (for
instance, damage of the load or of the loader).
IMPORTANT
Referred to information or integration on loader operation.
NOTE
Used to draw your attention on information or suggestions to make easier the loader usage for the operator.
The symbols and marks are completed with notices stating the dangers, their nature, the avoidance actions to be taken
and tips to be followed.
!
To Next Page
